Monogram ZIFS360NXRH Manual

Tempered glass shelves in the refrigerator and
wire shelves in the freezer enable you to make
efficient shelf arrangements to fit your family’s
food storage needs.

To remove shelves: Tilt shelf up at front, 
then lift it up and out of tracks on rear wall 
of refrigerator/freezer.

To replace shelves: Select desired shelf height.
With shelf front raised slightly, engage top lugs in
tracks at rear of cabinet. Then lower front of shelf
until it locks into position.

11

Shelves

The upper drawers have individual, adjustable
humidity controls that let you control the amount
of cold air entering the drawers.

Slide the control all the way to the High setting
and the drawer provides higher humidity levels
recommended for most leafy vegetables.

Slide the control all the way to the Low setting
and the drawer provides lower humidity levels
recommended for most fruits.

Excess water that may accumulate 
in the bottom of the drawers should 
be emptied and the drawers wiped dry.

Drawers in the refrigerator/freezer will 
stop before coming all the way out, to help
prevent contents from spilling onto floor. 

To remove a drawer, pull the drawer out and lift
the front of the drawer up and out of the wire
holder. Lift the back of the drawer up and out.

To replace a drawer, place the back 
of the drawer in the wire holder, making 
sure the extensions of the side of the drawer fit
into the back of the wire holder. Lower the front 
of the drawer into the wire holder. Press firmly 
on the top of the drawer.