Thermador T18ID800LP Installation Instruction
17
3.
If there enough room on the top of the appliance fix
the attachment plate side lugs (top) to the side of the
enclosure.
the attachment plate side lugs (top) to the side of the
enclosure.
4.
Screw on the bars of the fastening sheets (lateral)
with the cabinet parts located next to them.
with the cabinet parts located next to them.
Note:
In the case of a Side-by-Side installation this
installation step is not possible. These parts have
been removed.
installation step is not possible. These parts have
been removed.
5.
Shorten the fitting strip (a) to the required height to
fill the gap.
fill the gap.
6.
Press fitting strip (a) into the cover strip.
7.
Attach the cover strip (b) to the attachment plate
(top).
(top).
Note:
In the case of a side-by-side installation connect both
cover rails to the bolt included in the installation
accessories for side-by-side installation.
cover rails to the bolt included in the installation
accessories for side-by-side installation.
These are special installation steps.
Instructions are provided after section C.
Instructions are provided after section C.
Connecting the water, see
“Connecting the water to the
appliance”.
“Connecting the water to the
appliance”.