Thermador T30BB810SS User Manual

Page of 67
en-us
6
Electrical connection
,
WARNING: 
Avoid the risk of an electric shock!
,
WARNING: 
Insert into a grounded 3-phase socket. Never 
remove grounding phase. Do not use any 
adapters. Do not use any extension cables.
,
WARNING: 
Non-compliance with these instructions may 
result in death, fire or an electric shock. 
Improper connection of the protective conductor 
may result in an electric shock. If you are in 
doubt whether the appliance has been grounded 
properly, have the appliance tested by 
a qualified electrician or service technician.
The socket must be near the appliance and also freely 
accessible following installation of the appliance.
The appliance complies with protection class I. 
Connect the appliance to 115 V/60 Hz alternating 
current via a correctly installed socket with protective 
conductor. The socket must be fused with a 10 to 16 A 
fuse.
The appliance comes with a UL registered 3-wire power 
cord. The appliance requires a 3-pole socket.
Please observe the following table with regard to this:
Check on the rating plate whether the indicated voltage 
and current type correspond with the values of your 
power supply. The location of the rating plate can be 
found in the chapter entitled Customer service.
,
WARNING: 
Never connect the appliance to electronic 
energy saver plugs.
Our appliances can be used with mains and 
sine-controlled inverters. Mains-controlled 
inverters are used for photovoltaic systems 
which are connected directly to the national grid. 
Sine-controlled inverters must be used for 
isolated applications (e.g. on ships or 
in mountain lodges) which are not connected 
directly to the national grid.
Appliance
Maximum simulta-
neous load
Fridge-
freezer
6.0 amps