Broan APE130SS Specification Sheet

Broan-NuTone LLC    Hartford, Wisconsin    www.broan.com    800-558-1711

01M 

99044694A

Range hood shall be Broan APE1 Series.
Unit shall have a backdraft damper and be ducted 

vertically (horizontally) to the outside.
Unit shall have washable micromesh aluminum filters with 

special antimicrobial protection.
Unit shall have a permanently  lubricated, dual centrifugal 

blower resiliently mounted and controlled with an infinite 

speed, solid state control. RPM not to exceed 1618.
Hood shall have an infinite speed rotary control with 

memory and a separate, two-position light switch. Sides 

shall be straight and bottom hemmed - with no sharp 

edges. Stainless steel shall be 24-gauge, 430 series.
Air delivery shall be no less than 440 cfm and sound levels 

no greater than 7.0 Sones. All air and sound ratings shall 

be certified by HVI.
Unit shall be U.L. and cU.L. listed and ENERGY STAR

®

 

qualified.

• 

Professional styling in Stainless Steel only

• 

Available in 30" width only

•

 

Infinite speed rotary control with solid state blower memory 

and separate on/off switch

•

  Two-position light switch for "bright" or "night-light" illumination

• 

Single 42W GX24Q4 Fluorescent lamp with 4W C-7 night 

light (included)

• 

High efficiency dual centrifugal blower with resilient anti-

vibration motor mounts

• 

Broan Heat Sentry

TM 

- automatically turns blower to high 

speed when excess cooking heat is detected

• 

Two washable, micromesh aluminum grease filters with 

anitmicrobial protection that inhibits the formation of odor-

producing bateria and protects filter from discoloration

• 

Hemmed bottom for safety and good looks

• 

Damper/duct connector included

• 

Non-Ducted Recirculation Kit - NDK358 Series

  - ENERGY STAR

®

 qualification is void if hood is used in a 

non-ducted application

• 

Replacement filters (package of 2):

  - Grease with anitmicrobial protection - 97017456

  (BPAPFA)

  - Grease without anitmicrobial protection - 97017455

  (BPRPFA)

  - Non-Ducted - 97007662 (88F)

• 

For indoor use only

HVI-2100  CERTIFIED  RATINGS  comply  with  new  testing 

technologies  and  procedures  prescribed  by  the  Home 

Ventilating Institute, for off-the-shelf products, as they are 

available to consumers. Product performance is rated at 0.1 in. 

static pressure, based on tests conducted in a state-of-the-art 

test laboratory. Sones are a measure of humanly-perceived 

loudness, based on laboratory measurements.

120 

1.8 

60

  440 

200 

7.0 

0.7 

3¼" x 10" (Horiz.)

 

 

 

 

440 

200 

7.0 

0.9 

3¼" x 10" (Vert.)