Dacor DYWS4 Reference Guide

STEP 1   Move the wine dispensing system to a location 

with a dedicated 120 Volt, 3-prong grounded 

electrical outlet close by and adequate ventila-

tion.

STEP 2  Plug one end of the plastic gas tubing into the 

inert gas connector on the back of the system 

(see below).

STEP 3   Make sure the cable coming from the power 

supply (black box) on the back of the system is 

connected to the 

Power Input connector on the 

back of the unit.

Part No. 107499 Rev. A

Plastic gas 

tubing connects 

here

Connect to 120 Vac, 60 

Hz. electrical outlet

120 Vac power 

cord connects to 

power supply

Power 

supply

Power supply output 

connects here

1” (2.5 cm) 

min.