Blomberg DWT55300FBI Quick Reference Card

17 9093 01 00-BH

Turn the dishwasher on with the On/Off button. When turning on, 

the icon on the display module of the last used program will light up.

Use the Program Selection button to select the desired program. 

The icon of the corresponding program will light up.

Refer to “Table of Programme Data and Average Consumption 

Values” to select a programme suitable for your dishes. Select the 

desired programme with programme selection button.

Half Load/Tablet Detergent Button allows you to turn on and off the 

Half Load and Tablet Detergent functions of your machine.

Use this button to start the selected program. When the button is 

pressed once, the light on the button will turn on.

Stop the program with the Start/Pause/Cancel button.

You can follow the remaining program duration from the time 

indicator display.

This option enables you to start the selected program with a delay 

of 0,5 to 9,5 hours.

1. Delay time is adjusted by pressing the Time Delay button (press 

several times).

2. After adjusting the delay time, press the Start/Pause/Cancel 

button.

3. Close the door. At the end of the delay set, the program starts 

automatically.

During a wash program the Time Delay option does not function.

To cancel a program while the dishwasher is running:

1. Open the door gently.

2. Press and hold Start/Pause/Cancel button for 3 seconds. The 

indicator light will start flashing.

3. Close the door.

4. The dishwasher will drain the water inside the machine for 2 

minutes. At the end of the cycle a beep will sound. You can choose 

and start a new program.

 

To change the program selection while the dishwasher is running:

1. Open the door. 

2. Press Start/Pause/Cancel and select a new program.

3. Press Start/Pause/Cancel again, to start.

If this indicator light comes on, you 

need to refill rinse aid.

You can also tell whether rinse 

aid must be refilled by looking at 

the rinse aid dispenser. When the 

visual fill indicator is dark, there is 

enough rinse aid in the dispenser.

When the color is light, open the 

dispenser and refill rinse aid.

������

������

������

������

When this indicator light comes on, 

you must refill special salt. Only 

use special dishwasher salt in your 

machine to soften the water.

The salt content can be read on 

the container for the salt. When the 

visual fill indicator is dark, there is 

enough salt in the container.

When the color is light, open the 

container and add dishwasher salt.

 

������

������

������

������

1   On/Off button

2   Half Load indicator led

3   Salt level indicator led *

4   Start/Pause/Cancel indicator led

5   Start/Pause/Cancel button

6   Time Delay button

7   Time Delay indicator led

8   Rinse aid level indicator led

9   Remaining Time Indicator/Delay Time Indicator

10 Tablet Detergent indicator

11 Program Indicator

12 Half Load/Combi Tablet button

13 Program Selection button

Press and hold Half Load / Tablet Detergent key for 5 seconds until 

S:03 appears on the display. Every time you press the Half Load / 

Tablet Detergent key, the warning sound level will change as - - Off, 

S:01 Low, S:02 Medium, and S:03 High. After selecting the sound 

volume, wait for 10 seconds to save it. Factory setting of your 

machine is S:03.