Bosch SHX9PT75UC Operating Guide

The amount of rinse aid dispensed can be set from “r:00” to “r:06”.
To change the setting:
1

Press the [On/Off] button.

2      Hold down the “A” button (see page 4) and press [Start] until the display indicates “H:00”.
3      Release both buttons.
4      Press the “A” button until the display shows “r:05”.
5      Press the “C” button to select the desired setting.

“r:00” = dispenser is OFF
“r:01” = lowest setting
“r:02” = low setting
“r:03” = medium setting
“r:04” = medium/high setting
“r:05” = high setting
“r:06” = highest setting

6      Press [Start] to save the setting.

You can delay the start of the cycle in one hour increments up to 24 hours.

To set delay start:
1

Press the [On/Off] button.

2      Press the [+] button until the display jumps to “h:01”.
3      Press the [+] or [-] button until the displayed time corresponds with your requirements.

h:01 = 1 hour delay 
h:24 = 24 hour delay

4      Press [Start] to activate delay start.

To cancel delay start:
1

Press the [+] or [-] button until “h:00” is indicated on the digital display.

2      Press [Start] to save setting.

Open the door and press the [On/Off] button.

2      Hold down the “A” button (see page 4) and press [Start] until the display indicates “H:00”.
3      Release both buttons.
4      Press the “A” button until the display shows “b:02”.
5      Press the “C” button to increase or decrease the tone “b:00” = OFF and “b:03” = LOUDEST 
6      Press [Start] to save setting and close the door.

The final rinse uses a higher temperature which improves the drying results. The running time may
increase slightly.

To turn intensive drying on:
1

Press the [On/Off] button.

2      Hold down the “A” button (see page 4) and press [Start] until the display indicates “H:00”.
3      Release both buttons.
4      Press the “A” button until the display shows “d:00”.
5      Press the “C” button to turn intensive drying on or off. “d:01” = ON and “d:00” = OFF 
6      Press [Start] to save setting and close the door.