Frigidaire FGID2474QW Use & Care Manual
7
OPERATING INSTRUCTIONS
Status Window
The STATUS window, available on some models, indicates the following activity:
1-24.............
Number of delay start
hours. The last hour
will count down in
minutes.
CL....................
Close dishwasher
door. The status
indicator lights will
also fl ash to indicate
current cycle status.
current cycle status.
L0----L6............ Level of Rinse Aid
dosage.
Displayed
Error Code*
Problem
Solution
i10
A low fi ll has been
detected.
detected.
Look for a pinched water supply line, or water shutoff is
not completely opened.
not completely opened.
i20;
i40;
i40;
iF0
Clogged fi lters or a
restricted drain line
has been detected.
restricted drain line
has been detected.
Check and clean both fi lters and sump area and check
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug has
been removed.
for a pinched or blocked drain hose. If the drain line is
attached to a disposer, check that the knockout plug has
been removed.
i30
A leak or overfl ow
of water has been
detected in the
bottom pan.
of water has been
detected in the
bottom pan.
Look for loose connections at the water inlet valve and
ensure the unit is properly leveled.
ensure the unit is properly leveled.
i50
A problem has been
detected with the
drain or wash motor.
detected with the
drain or wash motor.
i60
A problem has been
detected with the
water heating system.
detected with the
water heating system.
iC0
A problem has been
detected with the
electronic control
system.
detected with the
electronic control
system.
Pressing the cancel button or turning power off at the
breaker for 5 min. should clear this error code and the
unit can be restarted.
breaker for 5 min. should clear this error code and the
unit can be restarted.
If this does not resolve the problem, service
will need to be called.
*In all Error Code instances, if Pressing the cancel button or turning power off at the breaker for 5
min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-9044.
min. does not resolve the problem, contact the Frigidaire Customer Care Center at 1-800-944-9044.
Instruction
Code
Displayed
Problem
Solution
CL
This indicates the
door has been left
open or not properly
latched.
door has been left
open or not properly
latched.
Ensuring the door is properly latched will clear the display.
This does not indicate a problem with your dishwasher
and service will not need to be contacted.
This does not indicate a problem with your dishwasher
and service will not need to be contacted.
MINUTES..........
Number of minutes
left in cycle (1-199).
U s e r I n s t r u c t i o n C o d e
E r r o r C o d e