Bosch SHV53TL3UC Owner's Manual

17

1

Start the desired cycle.

2     Hold down the button that says “Child Lock” underneath it for

approximately 4 seconds until the display reads “CL”.

3     The “CL” will be indicated now if any button is pressed and the pro-

gram will not be reset.

To deactivate the child lock:

1

Hold down the “Child Lock” button for approximately 4 seconds until 
the display no longer reads “CL”.

The final rinse uses a higher temperature which improves the drying
results. The running time may increase slightly.

To turn intensive drying on:
1

Press the [On/Off] button.

2     Hold down the “A” button (see page 15) and press [Start] until the

display indicates “d:00”. Release both buttons.

3     Press the “C” button to turn intensive drying on or off. “d:01” = ON

and “d:00” = OFF 

4     Press [Start] to save setting.

To save energy, the dishwasher is turned off 1 minute after the wash cycle
ends. Auto Power Off can be adjusted from P:00 to P:02.
To change the factory setting (P:01):
1

Press the [On/Off] button.

2     Hold  down  the  “A” button and press [Start] until the display indi-

cates “d:00”. Release both buttons.

3     Press the “A” button until the display indicates “P:01”.
4      Press the “C” button until the display corresponds with your requirements.

P:00 = dishwasher does not turn off automatically
P:01 (default) = dishwasher turns off automatically after 1 minute
P:02 = dishwasher turns off automatically after 120 minutes (2 hours)

5     

Press [Start] to save the setting

.