Monogram ZDT800S Specification Sheet

•  The dishwasher must be installed so that the drain hose 

is no more than 10 feet in length for proper drainage.

•  Water and power supply should enter in the  

shaded area.

•  Electrical and water connections are at the right front 

of the dishwasher. The hot water line should extend 
forward 30" to 40" from the rear wall. The electrical must 
extend forward at least 24" to reach the junction box.

•  To prevent siphoning, an air gap must be used when 

the waste tee or disposer connection is less than 18" 
above the floor.

23-1/4"

MAX.

33-3/8" MIN.

adj to

34-5/8" MAX.

23-3/4"

29-7/8"

27-1/2"

4"(toekick)

Includes 3/4" custom panel

The dishwasher must be supplied with 120V, 60Hz, and 
connected to an individual properly grounded branch 
circuit protected by a 15- or 20-amp circuit breaker or 
time-delay fuse.

These dishwashers require a field installed 3/4” thick 

custom panel and custom handle. An installation template 

is packed with these models and may be obtained in 

advance. Complete panel installation instructions are 

included on the template.
CUSTOM PANEL SIZE REQUIREMENTS
HEIGHT
Panel height must 

•     If the panel height is 

more than 30-1/4” it 

will prevent the door 

from swinging open.

•   If the panel height is 

less than 30-1/16” it 

will not cover the  

dishwasher door 

frame.

•   The top of the custom 

panel must be flush with the top of the door. The 1/2” 

minimum gap between the top of the door and the 

bottom of the countertop must 

be maintained.

•     If the panel width is less than  

23-3/4” it will not cover the  

dishwasher frame.

Minimum 1/2" gap  

for Clearance

Countertop

 1/2" min.

23-3/4"

30-1/16" Min.

30-1/4" Max.

Minimum 1/2" gap  

for Clearance

Countertop

 1/2" min.

23-3/4"

30-1/16" Min.

30-1/4" Max.

For answers to your Monogram,

® 

Profile Series 

or GE appliance questions, visit our website at 

geappliances.com or call GE Answer Center

®

 

service, 800.626.2000.

As an EnErgy StAr

®

 

partner, gE has determined 

that this product meets the 

EnErgy StAr guidelines 

for energy efficiency.

Listed by 

Underwriters 

Laboratories

* Dishwasher  models 

ZDT800SIF and ZDT870SIF 
require a 3/4" thick 
custom panel and will be 
24-3/4" deep.

150061

ZDT800SIFII/ZDT800SPFSS/ZDT800SSFSS

GE Monogram

®

 Fully Integrated Dishwashers