Bosch B10CB80NVS Owner's Manual

Page of 54
en-us
8
Controls
Switching the appliance on
1. Switch on the appliance with the button „On/Off“.
A warning signal sounds. Button „alarm“ flashes.
2. Press the button „alarm“. The warning signal 
switches off.
The button „alarm“ remains lit until the set freezer 
compartment temperature has been reached.
When the door is open, the light in the refrigerator 
compartment is lit.
Note:
If the light switch is pressed when the door is open, the 
light and the displays on the controls go out.
The preset temperatures are reached after several 
hours. Do not put any food in the appliance 
beforehand.
The factory has recommended the following 
temperatures:
Freezer compartment: 0 °F
Refrigerator compartment: 39 °F
Operating tips
When the appliance has been switched on, it may 
take several hours until the set temperatures have 
been reached.
The fully automatic No Frost system ensures that the 
freezer compartment remains free of ice. Defrosting 
is no longer required.
The sides of the housing are sometimes heated 
slightly. This prevents condensation in the area of 
the door seal.
If the freezer compartment door cannot be 
immediately re-opened after it has been closed, wait 
until the resulting low pressure has equalized.
On / Off
freezer °F
-11 -8 -4 0 3
36 37 39 42 46
°F
refrigerator
super
super
alarm
1
2
3
4
5
6
7
8
1
Button „On/Off“
Serves to switch the whole appliance on and off.
2
Button „alarm“ 
Used to switch off the warning signal, see chapter 
“Alarm function”.
3
Button „super freezer“
Switches super freezing on and off.
4
Button „> °F“
The button sets the temperature in the freezer 
compartment.
5
Freezer compartment display
Indicates the current temperature setting 
in the freezer compartment.
6
Button „super refrigerator“ 
Switches super cooling on and off.
7
Button „> °F“
The button sets the temperature in the refrigerator 
compartment.
8
Refrigerator compartment display
Indicates the current temperature setting 
in the refrigerator compartment.