Miele G6305SCU Owner's Manual

Before using for the first time

Water hardness
The display changes to the water hard‐

ness setting.

– The dishwasher must be program‐

med for the water hardness in your

area.

– Your local water supplier can tell you

the water hardness level in your area.

– Where the water hardness fluctuates

e.g. between 10 - 16 gr/gal (10 - 15

°d), always program the dishwasher

to the higher value (16 gr/gal or 15 °d

in this example).

It is useful to know your water hardness

so that you can provide the service

technician with this information in the

event of any service calls.
Enter the water hardness below:
____________ gr/gal (°d)
The dishwasher is programmed at the

factory for a water hardness level of 1

gr/gal (1 °d).
 Use the  arrow buttons to select

the hardness of your water supply

and confirm with OK.

See "Settings menu - Water hardness"

for more information.

The message

Set-up successfully com-

pleted

will then appear in the display.

After confirming this with OK, the

prompts 

Refill salt

and 

Refill rinse aid

may appear.
 Add salt and rinse aid if necessary

(see "Before using for the first time -

Dishwasher salt" and "Rinse aid").

 Confirm the messages with OK.
The program selected will appear briefly

in the display and the appropriate indi‐

cator light will come on.

Then, the display will show the estimat‐

ed program duration for the program

selected.
These basic settings will be saved in

memory after the dishwasher has been

through one complete program.