Blomberg DWT25200SSWS Quick Setup Guide

Page of 2
1   On/Off button
2   Start/Pause/Cancel button
3   Display
4   Program Selection buton
5   Half Load/Combi Tablet button
6   Time Delay buton
7   Door Handle
HOW TO USE YOUR DISHWASHER:
1. Open the door and load the dishwasher.
2. Check that both upper and lower spray arms move freely.
3. Pour correct amount of detergent into the detergent dispenser 
and close the lid.
4. Push in the On/Off button 
1 and check that the display lights 
come on.
5. Check the rinse aid level indicator led. 
10 If necessary, refill 
rinse aid.
6. Check the salt level indicator led. 
9 If necessary, refill salt. 
(model depending)
7. Use the Program Selection button 
4 to choose your washing 
program.
- When there are few dishes, additionally use the Half Load 
function.
- Depending on the hardness level of the tap water, the Tablet 
Detergent function allows better drying and washing performance 
from the multi-purpose tablets.
8. Start the program with the Start/Pause/Cancel button 
2.
9. Close the door and the program will start.
10. The End of Program indicator 
15 c
 lights up when the 
program is over.
11. Press the On/Off button 
1 and open the door after the program 
is completed. The indicator lights will go off.
12. Allow your dishes to cool for 15 minutes, with the door open.
13. Unload the dishes. Begin with the lower rack.
 
CAUTION
Avoid opening the door during the washing process. This 
interrupts the washing process, and hot steam will escape. 
Hot steam can cause burns and other serious injuries. When 
the door is closed, the program will continue.
QUICK REFERENCE GUIDE
EN
 WARNING
Before using the dishwasher, read carefully and follow the safety instructions in the Use and Care Manual.
8   Program Indicator
9   Salt level indicator led *
10 Rinse aid level indicator led
11 Remaining Time Indicator/Delay 
Time Indicator
12 Start/Pause/Cancel indicator led
13 Time Delay indicator led
��
��
��
�� ��
� ��
14 Half Load/Combi Tablet indicator led
15 Program Steps Follow-up Indicator
     
a Washing Step Indicator “ ”
     
b Drying Step Indicator “ ”
     
c End of Program Indicator “ ”
(* Model depending)
PROGRAM TABLE
Program number
1
2
3
4 Reference*
5
Program name 
Rinse & Hold
Quick Wash
China/Crystal
Regular Wash
Pots & Pans Plus
Wash Temperatures
(°F)
-
113
122
122
158
(°C)
45
50
50
70
Rinse Temperatures
(°F)
131
149
142 - 145
167
(°C)
55
65
61 - 63
75
Degree of dirtiness
-
Few
Few
Medium
High
Detergent in 
dispenser 
section
15 ml
-
+
-
-
-
15-25 ml
-
-
+
+
+
+ 5 ml
-
-
-
+
+
Recommended 
detergent 
amount
Hard 
water
ml
-
15-25
25
25-40
40
tsp
-
3-5
5
5-8
8
Medium 
water
ml
-
15
15-25
25
40
tsp
-
3
3-5
5
8
Soft 
water
ml
-
15
15
15-25
25-40
tsp
-
3
3
3-5
5-8
Program process
Wash 
▼ 
End
Main wash 
▼ 
Rinse 
▼ 
Final rinse 
▼ 
End
Main wash 
▼ 
Rinse 
▼ 
Final rinse 
▼ 
Dry 
▼ 
End
Wash 
▼ 
Main wash 
▼ 
Rinse 1 
▼ 
Rinse 2 
▼ 
Final Rinse 
▼ 
Dry 
▼ 
End
Wash 
▼ 
Main wash 
▼ 
Rinse 1 
▼ 
Rinse 2 
▼ 
Final Rinse 
▼ 
Dry 
▼ 
End
Duration (minutes)
12
34
65
100 - 135
120
Water (gallons)
1,2
3,1
3,1
3,43 - 5,34
5,3
Water (liters)
4,4
11,8
11,8
13,0 - 20,2
20,2
The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions.  
* The energy-usage label is based on this program.