Blomberg DWT55300SS Quick Reference Card
������
������
������
������
1 On/Off button
2 Half Load indicator led
3 Salt level indicator led *
4 Start/Pause/Cancel indicator led
5 Start/Pause/Cancel button
6 Time Delay button
7 Time Delay indicator led
8 Rinse aid level indicator led
9 Remaining Time Indicator/Delay Time Indicator
10 Tablet Detergent indicator
HOW TO USE YOUR DISHWASHER:
1. Open the door and load the dishwasher.
2. Check that both upper and lower spray arms move freely.
3. Pour correct amount of detergent into the detergent dispenser
and close the lid.
4. Push in the On/Off button
1 and check that the display lights
come on.
5. Check the rinse aid level indicator led.
8 If necessary, refill
rinse aid.
6. Check the salt level indicator led.
3 If necessary, refill salt.
(model depending)
7. Use the programme selection button
13 to choose your
washing programme.
- When there are few dishes, additionally use the Half load
button.
- Depending on the hardness level of the tap water, the
Tablet Detergent function allows better drying and washing
performance from the multi-purpose tablets.
8. Start the program with the Start/Pause/Cancel button
5.
9. Close the door and the program will start.
10. When the wash program has ended, an electronic beep will
sound and will continue every 10 seconds. After 2 minutes of
elapsed time the sound will stop. The beep can be stopped
also by opening the door or by pressing the On/Off buton
1.
11. Press the On/Off button
1 and open the door after the
program is completed. The indicator lights will go off.
12. Allow your dishes to cool for 15 minutes, with the door open.
13. Unload the dishes. Begin with the lower rack.
CAUTION
Avoid opening the door during the washing process. This
interrupts the washing process, and hot steam will escape.
Hot steam can cause burns and other serious injuries. When
the door is closed, the program will continue.
QUICK REFERENCE GUIDE
EN
WARNING
Before using the dishwasher, read carefully and follow the safety instructions in the Use and Care Manual.
11 Program Indicator
12 Half Load/Combi Tablet button
13 Program Selection button
(* Model depending)
PROGRAM TABLE
Program number
1
2
3
4 Reference*
5
Program name
Rinse & Hold
Quick Wash
China/Crystal
Regular Wash
Pots & Pans Plus
Wash Temperatures
(°F)
-
113
122
122
158
(°C)
45
50
50
70
Rinse Temperatures
(°F)
131
149
142 - 145
167
(°C)
55
65
61 - 63
75
Degree of dirtiness
-
Few
Few
Medium
High
Detergent in
dispenser
section
15 ml
-
+
-
-
-
15-25 ml
-
-
+
+
+
+ 5 ml
-
-
-
+
+
Recommended
detergent
amount
Hard
water
ml
-
15-25
25
25-40
40
tsp
-
3-5
5
5-8
8
Medium
water
ml
-
15
15-25
25
40
tsp
-
3
3-5
5
8
Soft
water
ml
-
15
15
15-25
25-40
tsp
-
3
3
3-5
5-8
Program process
Wash
▼
End
Main wash
▼
Rinse
▼
Final rinse
▼
End
Main wash
▼
Rinse
▼
Final rinse
▼
Dry
▼
End
Wash
▼
Main wash
▼
Rinse 1
▼
Rinse 2
▼
Final Rinse
▼
Dry
▼
End
Wash
▼
Main wash
▼
Rinse 1
▼
Rinse 2
▼
Final Rinse
▼
Dry
▼
End
Duration (minutes)
12
34
65
100 - 135
120
Water (gallons)
1,2
3,1
3,1
2,80 - 4,70
5,3
Water (liters)
4,4
11,8
11,8
10,6 - 17,8
20,2
The consumption values shown in the table were determined under standard conditions. For this reason, deviations are possible under practical conditions.
* The energy-usage label is based on this program.