Active Thermal Management System 2 Kit 00-201-02 Data Sheet

 

 

DATA SHEET 

 

 

 

 

   

 

 

The System 2 family was designed to cool the mid-size enclosure. Whether a 
wooden cabinet holding shelves or a rack, a video projector in a box, or a small 
closet, there's a member of the System 2 family that will solve the overheating 
problem. The original System 2 is an "all-in-one"; the fans and controller are 
mounted on a gasketed panel; just cut a 14" x 5.5" (approximate - don't cut 
before receiving unit) hole in the back panel of the enclosure, and provide an air 
input opening.  The two thermal sensors are clipped to whatever generates the 
most heat in the enclosure; video projector, hi-def cable box, or surround-sound 
amplifier, the sensors will adjust the speed of the 2 exhaust fans automatically 
and turn them off when the sensed equipment approaches room temperature.  
Maximum allowed fan speed is low; noise level approaches inaudibility. 
 
When a more flexible mounting technique is needed, the System 2 Kit solves the 
problem.  Available with 2 fans (the Kit) or with 4 fans (the 2+2 Kit), the kits give 
the installer the ability to mount the fans in the best possible location in a 
particular installation. In the side of a cabinet? Above a closet door? Through a 
wall (interior, of course!)? Follow the guidelines in our white paper on "Cooling 
the Mid-Sized Enclosure" (call or e-mail us for a copy) and let the Kits simplify 
your cooling problems.