Summit SCFF51OSSSHV Instruction Manual

6.  Relocate the door to the designated position. Then screw the bottom hinge assembly on the left 

designated position and tighten it after the door is leveled. (Fig. 1) 

 

7.  Remove the handle from the left side of the door and install it on the right side. (See next section.) 
 
INSTALLING THE STAINLESS STEEL HANDLE 

This appliance includes a stainless steel handle that is not required to 
operate the unit. To install the handle, follow the instructions below: 

1.  Use a screwdriver to remove the screws on the side of door 

where the handle is to be installed.   

2.  Align the handle with the screws removed in step # 1.  Tighten the 

screws using a Phillips head screwdriver until the handle is both 
flush and secured tightly against the door side. (DO NOT over-
tighten as this will cause damage to the stainless steel door 
surface.) 

 
 
 
 

OPERATING YOUR APPLIANCE 

 

It is recommended you install the appliance in a place where the ambient temperature is between 44º and 
106ºF (7º - 41ºC).  If the ambient temperature is above or below the recommended temperatures, the 
performance of the unit may be affected.  For example, placing your unit in extreme cold or hot conditions 
may cause interior temperatures to fluctuate.  The operating temperature range may not be reached. 
 
 
CONTROL PANEL for SPR626OS 
 

 
 
 
 

 

 

Handle

Door

Screw

 

To turn the appliance ON or OFF, touch the  

  symbol and hold for 5 seconds.  

NOTE: Pressing the POWER key once can switch off the audible alarm when the alarm is on. 
 

To control the inner light turn on/off. 

Used to increase (warm) the set temperature by 1°C/1ºF. 

Used to decrease (cool) the set temperature by 1°C/1ºF.