RangeCraft WM_CONVEX Important Safety Instructions

4-40 Banta Place Fair Lawn, NJ  07410  1-877-RCHOODS

 Use this unit only in the manner intended by 

the manufacturer.  If you have questions, 
contact the manufacturer.

 Before servicing or cleaning the unit, switch 

power off at service panel and lock service 
panel to prevent power from being switched 
on accidentally.

 Installation work and electrical wiring must 

be done by a qualified person(s) in 
accordance with all applicable codes and 
standards, including fire rated construction.

 Sufficient air is needed for proper 

combustion and exhausting of gases through 
the flue (chimney) of fuel burning 
equipment to prevent back drafts.  Follow 
the heating equipment and safety standards 
such as those published by the National Fire 
Protection Association, the American 
Society for Heating, Refrigeration and Air 
Conditioning Engineers, and the local code 
authorities.

 Due to the size and weight of this unit, two 

installers are recommended.

 When cutting or drilling into the wall or 

ceiling, do not damage electrical wiring and 
other hidden utilities.

 Ducted fans must always be vented to the 

outdoors.  Do not vent to an attic or crawl 
space.

 WARNING – TO REDUCE THE RISK OF 

FIRE, USE ONLY METAL DUCT WORK.

 Install this hood in accordance with all 

requirements specified.

 Never leave surface units unattended at 

high settings.  Boil overs can cause 
smoking and greasy spillovers may 
ignite.  Heat oils slowly on low or 
medium settings.

 Always turn the hood on when cooking 

on high heat or when flambéing or 
grilling foods.

 Clean filters frequently.  Grease should 

not be allowed to accumulate.

 Use proper fan size.  Always use 

cookware appropriate for the size of the 
surface element.