Dacor DDW24S Manual

Operating Your Dishwasher

Various functions and settings on your dishwasher

can be configured by the user. To change one of the

settings:
1. Open the door slightly. If the main power switch

is on, turn it off and wait about five seconds.

2. Turn on the main power switch. Wait for the

numbers to appear on the display.

3. Within five seconds of the numbers appearing on

the display, hold your finger on the

PROGRAM

touch key. Wait for the beep confirming the key

touch, then touch the

Dry key at the same time.

Touch both keys until the

Daily and Rinse and

Hold indicator lights flash.

Control Panel Settings

Function

Menu #

Settings

Description

Child lock

0 (off)/

1 (on)

When the child safety lock is engaged, the control panel touch keys do

not work normally, making it more difficult to program and start. See

page 3 for instructions on how to temporarily bypass the child lock.

End beep

volume

0 (off) to 4 Changes the volume of the beep used to indicate when a cycle is

finished or when a fault has occurred.

Key touch

beep volume

0 (off) to 4

Changes the volume of the beep emitted each time a key on the

control panel is touched.

Display

contrast

-1 to 3

Adjusts the contrast of the display.

Rinse aid

dispenser

0 (off) to 6

Adjusts the amount of rinse aid dispensed during each cycle.

4. While the

Daily and Rinse and Hold lights are

flashing, touch

START/STOP repeatedly until the

menu number for the desired function appears

on the left side of the display.

5. Touch

PROGRAM repeatedly until the desired

setting for the function being set appears on the

right side of the display.

6. Touch

START/STOP repeatedly to save the

setting and exit the menu. Repeat the above

steps to change the settings for a different

function.

Menu #

Rinse and Hold

Daily

Dry

Setting

Display