Bosch B30BB830SS Operating Guide

Page of 67
en-us
19
Eliminating minor faults yourself
Before you call customer service:
Please check whether you can eliminate the fault yourself based on the following information.
Customer service will charge you for advice  even if the appliance is still under guarantee!
Appliance
 
Fault
Possible cause
Remedial action
Appliance has no refrigeration 
capacity.
The light does not work.
The display does not illumi-
nate.
Appliance has been switched off.
Press the On/Off button.
Power failure.
Check whether the power is on.
The fuse has been switched off.
Check the fuse.
The mains plug has not been inserted 
properly.
Check whether the mains plug is secure.
The refrigeration unit is switch-
ing on more frequently and for 
longer.
Appliance opened frequently.
Do not open the appliance unnecessarily.
The ventilation openings have been 
covered.
Remove obstacles.
Large quantities of fresh food are 
placed in the freezer.
Activate “super” cooling and/or “super” 
freezing.
The temperature in 
the refrigerator compartment 
or freezer compartment is too 
cold.
Temperature has been set too low.
Increase the temperature (see chapter 
Selecting the temperature).
The light (LED) does not work. The LED lamp is defective.
Call customer service.
Light switch is jammed.
Check whether it can be moved.
You experience unpleasant 
odours.
Strongly smelling food is not sealed.
Clean the appliance. Seal strongly smelling 
food (see chapter “Odours”).
Display indicates “E..”.
Electronics have detected a fault.
Call customer service.
Display indicates “LOW-
POWER”.
The mains voltage falls below 
the permitted limiting value.
When the mains voltage reaches 
the stipulated value again, the warning mes-
sage goes out. If the warning message lasts 
for longer, inform the energy supply com-
pany.
Condensation forms on the rail 
on the left door.
Condensation of warm air.
Switch on heater in the rail, see chapter 
Switching the appliance on.