Scholtes LFDS3XL60HZ Use & Care Manual

•

press the button twice

twice

twice to select washing in the lower

lower

rack.

rack. This is confirmed by the relative indicator light
(ref. 9b fig. 7-02);

•

press the button thr

thr

three times

ee times

ee times to return to the standard

full load

full load condition (washing in both racks, both
indicator lights off).

When washing in just the lower rack

lower rack

lower rack is selected, the

the

cutler

cutlery basket can be separated

y basket can be separated

y basket can be separated and just half

just half

just half used.

PROGRAM DELAY
(only on some models; available for all programs except
soak).
The “Pr

Program delay

ogram delay

ogram delay” function delays the beginning of

the washing program up to 9 hours from the moment in
which programming takes place. This makes it possible
to use the dishwasher at a certain time of day.
Before programming a delay, open the door of the
dishwasher, select the required washing program (see
para 2.2 “Setting the washing program and switching on
and off”). Select the day by pressing the Pr

Program delay

ogram delay

button (ref. 10 fig. 2-02); each time you press the button,
the display increases the delay before the appliance
starts by 1 hour

1 hour

1 hour.....

7.2.8 Switching off
At the end of the program, the dishwasher emits a short
beep and the

indicator lights of the fourth and fifth

program (ref. pr. 4, pr. 5 fig. 7-04) flash.
Turn off the appliance by opening the door and pressing
the

on/off button (ref.1 fig. 7-02).

Fig. 7-04

If it is necessary to open the door during the washing
cycle, the program will be interrupted, the relative
indicator light will continue to flash and a beep will
indicate that the cycle has not terminated. Wait for about
1 minute before closing the door and continuing with the
program. When the door closes, the program will start
from where it was interrupted. This operation should be
performed

only if necessary as it could cause irregular

program performance.

8 ENERGY SAVING AND

ENVIRONMENTAL RESPECT

•

Always try to run the dishwasher fully loaded.

•

Do not wash the dishes under a running tap.

•

Use the

most suitable washing program for each

type of load.

•

Do not pre-rinse.

•

If available, connect the dishwasher to a hot water
system with a temperature of up to 60°C (140°F).

•

When possible,

skip the drying cycle by opening the

door after washing: the air and the residue heat will
dry the dishes to perfection.

8.1 Reducing the consumption of

detergent and respecting the environment

The phosphates contained in dishwasher detergents are
harmful to the environment. To avoid using excessive
amounts of detergent and to save on electricity:

•

Separate the more delicate items from those that are
more resistant to aggressive detergents and high
temperatures;

•

Do not pour the detergent directly onto the dishes.

9 REMOVING THE DISHES

At the end of the washing program, wait at least

minute before removing the dishes in order to allow
them to cool. To prevent any water droplets on the upper
rack from falling onto the dishes in the lower rack,

empty

the lower rack first and then the upper one.