Scholtes LFDS3XL60HZ Use & Care Manual

Page of 96
EN
7
INSTALLATION
INSTRUCTIONS
3 INSTALLATION MATERIAL
To install the dishwasher correctly, the following materials
are required:
Phillips screwdriver (ref. A fig. 3-01);
spirit level (ref. B fig. 3-01);
tape measure (ref. C fig. 3-01);
compass saw (ref. D fig. 3-01);
pencil (ref. E fig. 3-01);
file (ref. F fig. 3-01);
13 mm open-ended wrench (ref. G fig. 3-01);
plumbing pliers (ref. H fig. 3-01);
drill (ref. I fig. 3-01);
safety gloves (ref. L fig. 3-01).
Fig. 3-01
3.1 Kit supplied with dishwasher
(models LTE)
The kit supplied with the dishwasher comprises:
adhesive steam guard (ref. A fig. 3-02);
1 steel steam guard (ref. B fig. 3-02);*
1 template for door panel (ref. C fig. 3-02);
2 hooks for door panel (ref. D fig. 3-02);
8 screws for securing the door panel hooks (ref. E fig.
3-02);
2 screws for securing the door (ref. F fig. 3-02);
2 screws for fixing the dishwasher to the adjacent
walls (ref. G fig. 3-02);
2 screw caps (ref. H fig. 3-02).
2 adjustment feet (only for some models) (ref. I fig. 3-
02);
2 nuts (only for some models) (ref. L fig. 3-02);
2 washers (only for some models) (ref. M fig. 3-02).
Fig. 3-02
* The adhesive protection is suitable for kitchens with
worktops that do not allow the steel protection to be
fixed with screws (e.g.:+ marble or masonry), but it can
be also used with other materials.