Dacor DCT305SLPH Manual

10

Cleaning the Burners and Igniters

Use care while cleaning the igniters. The porcelain is 

fragile and can crack or break.

IMPORTANT: Dirty or wet igniters may not work 

properly or may not spark at all. Also the ignit-

ers may not work if any other burner parts are not 

clean. 
Check for any dirt or grime deposited on the indi-

vidual burner parts, or the igniters.
1.  Clean completely around the igniter, including 

over and under the edge of the metal top and 

porcelain base. A firm toothbrush is also ideal for 

this task. Use care while cleaning because the 

porcelain is fragile and can crack or break. Do 

not use water to clean the igniters. If necessary, 

use a small amount of rubbing alcohol to help 

dissolve grime.

2.  Examine the burner rings and the top of the 

SimmerSear burner base. Remove anything 

stuck in the slots with a straightened paper clip, 

wire or needle. Be careful not to scratch, deform 

or damage the ring and base. Do not distort the 

shape of the slots. Since the SimmerSear burner 

base is not removable, it must be cleaned in 

place.

3.  Clean all the burner parts, including the Sim-

merSear burner base, with window cleaner 

or rubbing alcohol. Use a cleaning brush with 

plastic bristles or a firm tooth brush. When done, 

rinse the parts well with clean water. Dry all the 

parts thoroughly before re-assembling them.

Care and Cleaning

Inner burner cap

Outer burner cap

Igniter on 

burner base

Top of burner 

base

Burner ring 

slots

Burner cap

Burner cap

Igniter on 

burner base

Igniter on 

burner base

Burner ring 

slots

Burner ring 

slots

CAUtION: Top of 

igniter is sharp

CAUtION: Top of 

igniter is sharp

4.  Reassemble the cooktop according to the burner 

and grate assembly instructions on pages 5 

and 6. Test the burners after reassembling 

them. If the flame is uneven, be sure that all the 

burner parts are properly positioned, then check 

for any remaining dirt or grime on the burner 

parts or igniter. If erratic clicking is still present, 

make sure the igniter is completely dry. If the 

unit still exhibits problems after drying, call your 

local Dacor Authorized Service Agent.