Fire Magic E250T1Z1E Installation Instruction
1
IMPORTANT:
READ THESE INSTRUCTIONS CAREFULLY BEFORE STARTING INSTALLATION OR USE.
ELECTRIC GRILL
Certifi ed to: UL 1026-2007
Robert H. Peterson Co. • 14724 East Proctor Avenue • City of Industry, CA 91746
INSTALLATION INSTRUCTIONS
AND OWNER’S MANUAL
INSTALLER:
Leave these instructions with consumer.
CONSUMER:
Retain for future reference.
WARNING
I
m p r o p e r i n s t a l l a t i o n , a d j u s t m e n t ,
alteration, service, or maintenance can
cause injury or property damage. For
proper installation, refer to the installation
instructions. For assistance or additional
information, consult a qualifi ed professional
cause injury or property damage. For
proper installation, refer to the installation
instructions. For assistance or additional
information, consult a qualifi ed professional
installer or service agency.
SAFETY AND WARNING CODES
Pedestal
model
shown
WARNING
When connecting this appliance to a power
supply make sure that it is the same voltage as
the unit rating. Improper connection may cause
severe damage to the components or decrease
the performance of your Fire Magic
supply make sure that it is the same voltage as
the unit rating. Improper connection may cause
severe damage to the components or decrease
the performance of your Fire Magic
®
electric grill.
A rating plate specifying voltage, hertz, wattage,
and amps is attached to the unit and also located
on page 3. To avoid the risk of property damage
and/or personal injury, installation work and
electrical wiring must be performed by a qualifi ed
professional installer. This appliance must be
installed in accordance with this instruction.
and amps is attached to the unit and also located
on page 3. To avoid the risk of property damage
and/or personal injury, installation work and
electrical wiring must be performed by a qualifi ed
professional installer. This appliance must be
installed in accordance with this instruction.
PLEASE READ AND FOLLOW
• Removing permanently affi xed rating warning
labels WILL void the warranty.
• Observe all local codes and ordinances when
installing this appliance. If no local codes are
applicable, wire unit in accordance with the
latest National Electrical Code, ANSI/NFPA 70,
or the Canadian Electrical Code, CSA C22.1,
whichever is applicable.
applicable, wire unit in accordance with the
latest National Electrical Code, ANSI/NFPA 70,
or the Canadian Electrical Code, CSA C22.1,
whichever is applicable.
WARNING
To minimize the risk of property damage
and/or personal injury, do not use a fl exible
extension power-supply cord unless it
conforms with the specifi cations as listed in
and/or personal injury, do not use a fl exible
extension power-supply cord unless it
conforms with the specifi cations as listed in
this manual (see page 7 for details).
NOT FOLLOWING THESE
INSTRUCTIONS EXACTLY WILL VOID
THE MANUFACTURER'S WARRANTY.
254-B-22-2
REV 3 - 0909231438
L-C2-30309