Monogram ZDP486NDPSS Specification Sheet

Page of 3
For answers to your Monogram,
® 
GE Profile
 or 
GE
®
 appliance questions, visit our website at 
ge.com or call GE Answer Center
®
 service,  
800.626.2000.
130558
Specification Created 7/08
Listed by 
Underwriters 
Laboratories
ZDP486NDPSS (Natural Gas)
ZDP486LDPSS (Liquid Propane)
GE Monogram
® 
48" Dual-Fuel Professional Range with 6 Burners and Griddle
Dimensions and Installation Information (in inches) 
Professional ranges offer a number of choices in size and 
cooktop configurations.
 All Professional Ranges are factory set for natural or liquid 
propane gas. The correct model should be ordered for the 
installation situation.
Note: Conversion kits are included with the range if the wrong 
gas type was ordered. High Altitude kit, WB28K10553 for 
operation above 3,000 feet (for Natural and LP gas models), is 
also available. The kits must be installed by a qualified service 
technician at additional cost.
Installation Information 
Before installing, consult installation instructions packed with 
product or online at Monogram.com for current dimensional 
data.
A 48" or 54" wide professional vent hood with a minimum 1200 
CFM is recommended for installation over this range.
Advance Planning
Refer to dimensional drawings 
for appropriate placement and 
necessary clearances when planning 
the installation.
•  Working areas adjacent to the 
range should have 18" minimum 
clearance between countertop and 
cabinet bottom.
•  Clearance between range and side 
wall or combustible material must 
be at least 12" on each side.
•  Installation must conform with 
local codes. In the absence of local 
codes, the range must comply with 
the National Fuel Gas Code, ANSI 
Z223.1-1990.