Monogram ZDP304NPSS Installation Instruction

Page of 68
Runners
To Support
Leveling Legs
Panel
Range
Opening
Range 
Opening
Runners 
for Rolling 
the Range 
into Position
Lift the toekick out of the foam base.
Installation Preparation
MOVE THE RANGE INDOORS
Tilt the range forward on the skid.
STEP 2
Tilt the range to one side and remove the foam block.
Move the range indoors. Position the range 
in front of the installation location. 
Place the appliance runners on the floor 
at the left and right sides of the opening. 
The runners provide a surface for rolling 
the range into the final position and will protect
the floor finish. The runners must be removed
before leveling the range.
12
Insert Blade Under
the Range Legs
Slide the blade of the hand-truck beneath 
the front and back legs.
IMPORTANT: Place the hand-truck straps below
the oven door handles. 
Tilt the range to lower the hand-truck wheels 
off the skid.
Hand-Truck
Straps Below
Oven Door
Handles
Toekick
Toekick