Frigidaire FRS123LS1 Owner's Manual

How the air conditioner works

Automatic operation
When the Air Conditioner is ready for use, switch on the power and the
OPERATION indicator lamp on the display panel of the indoor unit starts
flashing.

1. Use the MODE button to select AUTO.
2. P

ress the TEMP button to set the desired room temperature. The most

3. P

ress the ON/OFF button to start the air conditioner. The OPERATION

lamp on the display panel of the indoor unit lights. The operating mode

shown on the display panel of the remote controller.

4. P

ress the ON/OFF button again to stop the unit operation.

COOL / HEAT and FAN ONLY operation
1. If the AUTO mode is not comfortable, you may manually override the

2. P

ress the TEMP button to set the desired room temperature. When in COOL

3. P

ress the FAN SPEED to select the FAN mode of AUTO, HIGH, MED or LOW.

4. P

ress the ON/OFF button, the operation lamp lights and the air conditioner

start to operate as your settings. P

ress the ON/OFF button again to stop this

unit operation.

**Note: The FAN ONLY mode can not be used to control the temperature.

While in this mode, only steps 1,3 and 4 may be performed.

1. When you set the air conditioner in AUTO mode, it will automatically select

depending on what temperature you have selected and the room
temperature.

2. The air conditioner will control room temperature automatically round the

temperature point set by you.

3. If the AUTO mode is uncomfortable, you can select desired conditions

manually.

How the air conditioner works

Attention

mode, the most comfortable settings are

* Not

e: Only for models with heating function

cooling, heating(

only for models with heating function) or fan only operation

comfortable temperature setting are between 70ºF o to 82ºF.

AUTO FAN SPEED is automatically set and there are no

indicators

settings by using COOL, HEAT* or FAN ONLY** mode.

mode, the most comfortable settings are 70ºF or above. When in HEAT

82ºF or

below.