GE GIE18GSHSS Manual

11

(Handles may be easier to reverse while doors 

are off.)
Figure 1 Style Handles
 1.  Remove two screws attaching handle to 

top of refrigerator door. 

 2.  Remove screw attaching bottom of handle 

to door.

 3.  Remove two hole plugs and hinge pin 

plug on top of door and install on opposite 

side. Use Phillips head screwdriver to 

remove plastic screw plug from front of 

door and install on opposite side

Figure 2 Style Handles
 1.  Remove two screws attaching handle to 

top of refrigerator door.

 2.  Swing top of handle away from door and 

slide handle down and off of dovetail 

button.

 3.  Remove screw and dovetail button and 

install on other side, moving hole plugs 

from corresponding holes to opposite side.

Figure 1 Style Handles
 1.  Secure bottom of handle with screws. 
 2.  Secure top of handle with screws.
Figure 2 Style Handles
 1.  Start with handle offset away from door. 

Place bottom of handle over dovetail 

button, swing handle into an upright 

position and pull upward, locking it into 

place.

 2.  Secure top of handle with screws.

 1.  Slide both trim locks out of trim.
 2.  Insert new adhesive trim locks contained 

in your literature pack.

 3.  Install trim to handle by sliding under base 

of handle. Carefully align trim and press 

down at trim lock locations.

 4.  Use rubbing alcohol to remove any 

adhesive residue from old trim lock 

locations.