Prestige PLBN30240 Installation Instruction
10
-Installing the Wall Hood Duct Cover (Flue) (PC Models Only)-
1. Measure from top of the canopy to ceiling and subtract 1/8" for clearance.
2. Place the duct cover top inside the duct cover base and lower until desired height is
found. (To eliminate scratches, make a mark on the duct cover top for the desired
lowering point by subtracting 15" from the total height needed.)
lowering point by subtracting 15" from the total height needed.)
3. Use the retaining screws to fasten in place.
4. Slide the duct cover in place and fasten from inside canopy using the sheet metal
screws provided.
NOTE: For installations with ceilings above 9', use optional custom flues. See product
literature for details.
literature for details.