Speed Queen AWNE92SP113TW01 Owner's Manual

IMPORTANT: Before using your new washer, make sure

the washer cord is connected to an appropriate electrical

outlet that is properly installed and connected to a pro-

tective earth/ground. Make sure the washer hoses are

connected to the hot and cold water faucets, and that the

faucets are turned on. Be sure the drain hose is not

kinked and is inserted into a drain. Refer to the INSTAL-

LATION INSTRUCTIONS for details of proper washer in-

stallation.
IMPORTANT: Prior to first wash, use an all purpose

cleaner, or a detergent and water solution, and a damp

cloth to remove shipping dust from inside of wash drum.
1. Get the clothes ready for washing. Empty pockets and cuffs.

Sort items into separate loads. Pretreat stains and heavily
soiled areas.

TLW1991N_SVG

IMPORTANT: Remove all sharp objects from laundry

to avoid tears and rips to items during normal ma-

chine operation.

2. Measure and add low sudsing, High Efficiency (HE) detergent to

the washtub. Follow instructions on detergent package for
amount to use.

TLW1995N_SVG

NOTE: NOTE: High efficiency (HE) detergent is rec-

ommended for use in this machine. Look for the HE

logo or “high efficiency” on the detergent’s label.

3. Add clothes loosely into the washtub (16 lbs. [7.2 kg] maxi-

mum dry clothes load).

TLW1996N_SVG

4. Close the lid. The washer will not fill, agitate or spin with the lid

open.

TLW1997N_SVG

WARNING

To reduce the risk of serious injury, do not by-pass

the lid switch by permitting the washer to agitate or

spin with the lid open.

W523

5. If not already on (control lights will be lit), turn on the washer.

Press the Power button to turn on the washer.
NOTE: You will not be able to press the Start/ Pause

button to start a cycle until five seconds after turning

on the washer.

6. Select the cycle according to the type of fabric being washed. If

the selected cycle is not the correct cycle for the fabric being
washed, you may change the cycle selection at any time until
the first wash fill is complete.
NOTE: The Normal Eco cycle is recommended for

everyday cottons and linens.

7. If desired change the Selections and Options settings.
8. Press the Start/Pause button to begin the cycle.

NOTE: Lid must be closed for fill, agitation and spin

to start.

The washer will stop (pause) shortly before the wash and rinse
spins. They are a normal part of the cycle.

Manual Soaking

Do not fill the washer and open the lid or press the Start/Pause
button to perform a soak cycle. Use the Soak option on the control
panel to perform this operation.

Control Panel

Part No. 202956R2