Bosch HBE5451UC Installation Instruction

Four-wire Connection
Ungrounded Neutral

▯

Connect the red oven wire to the red electrical supply

wire (hot wire).

▯

Connect the black oven wire to the black electrical

supply wire (hot wire).

▯

Connect the white neutral oven wire to the white

neutral (not bare or green ground) electrical supply

wire.

▯

Connect the green ground oven wire to the bare or

green ground electrical supply wire.

Three-wire Connection
Grounded Neutral

▯

Connect red wire from oven to red wire in junction box.

▯

Connect black wire from oven to black wire in junction

box..

▯

Connect both green ground wire and white wire from

oven to white, green or bare neutral wire in junction

box.

The conduit cable, where connected at the oven, swivels.

Rotate conduit cable upward (or downward) and direct

through hole prepared in cabinet to attach to junction

box.
To maintain serviceability, the flex conduit must not be

shortened and should be routed to permit temporary

removal of the oven.

Mount to cabinet

NOTICE: Before installing the appliance, be sure to

verify the cabinet dimensions and electrical connections.
Note: The appliance is heavy. It is advisable to install it

with a second person.

Fully insert the appliance and centre it.
NOTICE: Do not kink the connecting cable or route it

over sharp edges.

Remove the rubber profiles.

In the holes there are plastic sleeves which are

required for fastening.

Secure the appliance to the cabinet using 2 screws.

Reinsert the rubber profiles.

Check the Installation

WARNING

Before you plug in an electrical cord or turn on

power supply, make sure all controls are in the OFF

position.

Switch on the circuit breaker.
Verify that elements function properly.

SRZHUVXSSO\

MXQFWLRQER[

UHGZLUHV

JUHHQRUEDUH

JUHHQZLUH

8/OLVWHG

FDEOHIURP

ZKLWHZLUHV

EODFNZLUHV

ZLUH

FRQQHFWRU

RYHQ