Viking RVER33015BBK Installation Instruction

Page of 28
12
General Information
READ AND FOLLOW ALL WARNING
AND CAUTION INFORMATION
WHEN INSTALLING THIS APPLIANCE.
•  All openings in the wall behind the
appliance and in the floor under the
appliance must be sealed.
•  DO NOT obstruct the flow of combustion
and ventilation air.
Moving, Handling, and Unpacking
Remove and discard all packing materials,
including cardboard and tape on the outside
and inside of the range.
Range – DO NOT discard
the anti-tip metal brackets (2)
supplied with the range.
These are the anti-tip devices
and one must be installed
with the unit. 
Refer to 
“Anti-tip Device Installation”
section.
Some stainless steel parts
may have a plastic protective
wrap which must be peeled
off. The interior should be
washed thoroughly with hot, soapy water to
remove film residues and any dust or debris
before being used, then rinsed and wiped
dry. Solutions stronger than soap and water
are rarely needed.
CAUTION
Avoid any damage to oven vents. The vents
need to be unobstructed and open to provide
proper airflow for optimal oven performance.
CAUTION
The cooling fan should be operating when
the unit is in operation. If you notice the
cooling fan is not operating or you observe
unusual or excessive noise coming from the
cooling fan, contact a Viking Authorized
Service Center before continuing operation.
Failure to do so can result in damage to the
oven or surrounding cabinets.