Frigidaire FGID2477RF Owner's Manual
6
OPERATING INSTRUCTIONS
My Favorite Cycle
The MY FAVORITE CYCLE option allows you to
program your preferred cycle and options into
one button. Once Programmed, simply press the
FAVORITE CYCLE button followed by the START/
CANCEL pad will select the programmed cycle and
options.
To Program the FAVORITE CYCLE button:
1.
program your preferred cycle and options into
one button. Once Programmed, simply press the
FAVORITE CYCLE button followed by the START/
CANCEL pad will select the programmed cycle and
options.
To Program the FAVORITE CYCLE button:
1.
Select your preferred cycle and options
2.
Hold the FAVORITE CYCLE button for 3
seconds.
seconds.
The LED over the FAVORITE CYCLE pad turns on
indicating the MY FAVORITE CYCLE option has
been programmed. To change the MY FAVORITE
CYCLE option simply repeat steps one and two
above.
indicating the MY FAVORITE CYCLE option has
been programmed. To change the MY FAVORITE
CYCLE option simply repeat steps one and two
above.
To Cancel a Cycle
To cancel a cycle at anytime, open the door and
press the START/CANCEL pad until you hear a
tone. When the door is opened, the last cycle
selected will be displayed. If desired, a new cycle
can now be selected by pressing START/CANCEL
pad and upon closing the door the cycle will begin.
press the START/CANCEL pad until you hear a
tone. When the door is opened, the last cycle
selected will be displayed. If desired, a new cycle
can now be selected by pressing START/CANCEL
pad and upon closing the door the cycle will begin.
Delay Start
The DELAY START option allows you to
automatically delay starting your dishwasher from
1-24 hours.
To activate press the DELAY START pad until the
desired delay time shows in the STATUS window
and press START.
To cancel the DELAY START option and begin the
cycle before the delay period is over, press the
START/CANCEL pad until the status window show
cycle duration. Press START/CANCEL again and
close the door.
automatically delay starting your dishwasher from
1-24 hours.
To activate press the DELAY START pad until the
desired delay time shows in the STATUS window
and press START.
To cancel the DELAY START option and begin the
cycle before the delay period is over, press the
START/CANCEL pad until the status window show
cycle duration. Press START/CANCEL again and
close the door.
Child Lock Controls
To prevent children from accidentally changing the
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the DELAY
START pad until the status window displays “loc”.
To unlock the controls, press the DELAY START
pad until “loc” is no longer displayed in the status
window.
dishwasher cycle or starting the dishwasher, lock
the dishwasher controls by pressing the DELAY
START pad until the status window displays “loc”.
To unlock the controls, press the DELAY START
pad until “loc” is no longer displayed in the status
window.
Status Indicator Lights
The CLEAN light will remain on until the door is
opened.
opened.
When the SANITIZE option is selected and the
criteria is met, the Sanitized indicator will display
and remain on until the door is opened. If the
sanitization criteria is not achieved, the indicator
will not display. This can happen if the cycle is
interrupted or if the sanitization temperature
could not be reached due to incoming water
temperature signifi cantly below 120
criteria is met, the Sanitized indicator will display
and remain on until the door is opened. If the
sanitization criteria is not achieved, the indicator
will not display. This can happen if the cycle is
interrupted or if the sanitization temperature
could not be reached due to incoming water
temperature signifi cantly below 120
0
F.
Green Light
When the GREEN LIGHT illuminates on the fl oor
this indicates that the wash cycle is complete.
this indicates that the wash cycle is complete.
Heat Dry
The HEATED DRY option in combination with rinse
aid will enhance drying performance. HEATED DRY
option is available on all cycles.
aid will enhance drying performance. HEATED DRY
option is available on all cycles.
Air Dry
The AIR DRY option will reduce temperature in the
hot rinse of the selected wash cycle. This option
will slightly decrease energy usage but will increase
the likelihood that dishware will not be dry.
hot rinse of the selected wash cycle. This option
will slightly decrease energy usage but will increase
the likelihood that dishware will not be dry.
Sanitize Option
To sanitize your dishes and glassware, select
SANITIZE option, by pressing WASH TEMP pad.
When selected, the light will come on and remain
on until end of cycle. The water temperature in
the fi nal rinse will be raised to 155
SANITIZE option, by pressing WASH TEMP pad.
When selected, the light will come on and remain
on until end of cycle. The water temperature in
the fi nal rinse will be raised to 155
o
F (68
o
C) and
will maintain that temperature for 9 minutes. This
option is available in Heavy Wash/Power Plus and
Normal Wash Cycles. Only these sanitization cycles
have been designed to meet NSF requirements.
option is available in Heavy Wash/Power Plus and
Normal Wash Cycles. Only these sanitization cycles
have been designed to meet NSF requirements.
The cycle time will be extended until the proper
water temperature is reached.
water temperature is reached.
Washing action will
continue during the water heating delay. For best
results, the incoming water temperature should be
at least 120
results, the incoming water temperature should be
at least 120
o
F (49
o
C).
The sanitize criteria may not be satisfi ed if there is
an interruption of the cycle, power failure or if the
incoming water temperature is below 120
an interruption of the cycle, power failure or if the
incoming water temperature is below 120
o
F (49
o
C).
To turn off the SANITIZE option, press the Wash
Temp pad. The SANITIZE light will turn off.
Temp pad. The SANITIZE light will turn off.