GE PVW7301EJES Installation Instruction

• 

 

³Save these instructions 

for local inspector’s use.

• 

³ Observe all governing 

codes and ordinances.

• 

Note to Installer – Be sure to leave these 

instructions with the Consumer.

•  Note to Consumer – Keep these instructions 

for future reference.

•   Skill  level  – Installation of this vent hood 

requires basic mechanical and electrical skills.

• Completion time – 

 Approximately 

1 to 3 hours

•   Proper installation is the responsibility of the 

installer. 

•   Product failure due to improper installation is 

not covered under the Warranty.

 Before beginning the 

installation, switch power off at service panel and 

lock the service disconnecting means to prevent 

power from being switched on accidentally. 

When the service disconnecting means cannot 

be locked, securely fasten a prominent warning 

device, such as a tag, to the service panel.

A.  Installation work and electrical wiring 

must be done by qualified person(s) in 
accordance with all applicable codes and 
standards, including fire-rated construction.

B.  Sufficient air is needed for proper 

combustion and exhausting of gases 
through the flue (chimney) of fuel burning 
equipment to prevent back drafting. Follow 
the heating equipment manufacturer’s 
guidelines and safety standards such 
as those published by the National Fire 
Protection Association (NFPA), the 
American Society for Heating, Refrigeration 
and Air Conditioning Engineers (ASHRAE) 
and the local code authorities. 

C.  When cutting or drilling into wall or ceiling, 

do not damage electrical wiring and other 
hidden utilities.

D.  Ducted fans must always be vented to the 

outdoors.

E.  Turn off breaker to adjacent rooms while 

working.

 Due to the weight and size of 

these vent hoods and to reduce the risk of 

personal injury or damage to the product, TWO 

(991.0364.613 rev 1)   31-11007   04-15   GE