Gaggenau BS484611 Owner's Manual

The default date appears in the display. The day 
setting is already active.

Set the required day with the rotary selector.

Switch to the month setting with the 

C

 symbol.

Set the month with the rotary selector.

Switch to the year setting with the 

C

 symbol.

Set the year with the rotary selector.

Confirm with 

™

.

The two possible formats °C and °F appear in the 
display. The °C format is selected by default.

Set the required format with the rotary selector.

Confirm with 

™

.

"Water filter” appears in the display. The default is 
"Available".

It is recommended to install the descaling system 
GF 111 100 if the water hardness exceeds 7°dH 
(carbonate hardness 5°dH).

Use the rotary selector to select "Available" (with 
water filter) or "Not available" (without water 
filter).

Confirm with 

™

.

If water filter "Available" has been selected: 
"Water filter capacity” is shown in the display.

Turn the rotary selector to select the capacity of 
the filter cartridge (between 100 - 9000 liters). 
Refer to the instructions included with the filter 
cartridge.

Confirm with 

™

.

"Water hardness" appears in the display. 

Check the mains water with the included 
carbonate hardness test: fill the small 
measurement tube with mains water up to the 5 ml 
mark.

Add drops of indicator solution until the color 
changes from purple to yellow.

 count the drops and carefully swing 

the measurement tube after every drop until the 
liquids have mixed thoroughly. The number of 
drops corresponds to the water hardness.

Set the measured water hardness with the rotary 
selector. The value 12 is set by default.

Confirm with 

™

.

"Initial set-up complete. Please calibrate the appliance 
before first cooking" appears in the display.

'DWH

7HPSHUDWXUHIRUPDW

:DWHUILOWHU

$YDLODEOH

:DWHUKDUGQHVV