British Telecom Granite 43685 User Manual
Product codes
43685
42
If you experience any problems, please call the Helpline on 0808 100 6556*
Answering machine
Remote access
When remote access is switched on, you can call in from another phone to listen to
your messages and operate your answering machine.
your messages and operate your answering machine.
Remote access on / off
You can switch remote access on or off. When on, you can operate your answering
machine from any other Touchtone
machine from any other Touchtone
TM
phone. Default setting is On.
1. Press
Menu
, scroll
or
to
AnSwer
MAChine
. Press
SeleCt
.
2. Scroll
to
AnS
SettingS
and press
SeleCt
.
3. Scroll
to
reMote
ACCeSS
. Press
SeleCt
.
4. Scroll
or
to
ACtivAte
or
DeACtivAte
. Press
ok
.
5. Press
BACk
to return to the previous menu level.
If you forget to switch on your answering machine
1. Call your number from another phone and let it ring. After 20 rings the
machine will switch on and answer your call.
2. Enter your system PIN (original setting 0000). Play back your messages as
shown below in ‘Operating your answering machine remotely’.
If you do not choose to switch your answering machine On, it will switch off when
the call is ended.
the call is ended.
Operating your answering machine remotely
1. Dial your phone number. When you hear your outgoing message, press
*
.
You will hear, “Please enter your security code”.
2. Enter your 4 digit Remote Access PIN (default 0000). If you have new
messages, these will be played. Otherwise you will hear “You have no new
messages” followed by the main menu.
messages” followed by the main menu.
You can now use the keypad to operate your answering machine.
Each message is played back with the day and
time of the call announced.
If the base speaker is set to 0, call screening is
switched off.
If you enter the incorrect PIN code you will be
allowed two further attempts, if it is still incorrect
you will hear, “Thank you for calling”, and your
BT Granite will hang up. If you do not press any
button for more than 10 seconds, your BT Granite
will hang up.
If the * is not recognised it may be because you
have deactivated the remote access feature, see
above “Remote access on / off” for details.