Zephyr AHZM90A Manual

• Carefully read the following important information regarding installation
safety and maintenance. Keep this information booklet accessible for further
consultations. 

For connection to the power supply refer to the following:

1. Open the fl ap Fig.16

2. Remove the power supply cover by undoing 

the (2) screws Fig. 17.

3. Connect the wires of the hood to those of 

the power supply as described. Fig.18 :  

BLACK =  L line
WHITE =  N neutral
GREEN / YELLOW =   G ground

- A double-pole switch properly rated must  

be installed to provide the range hood 
power supply disconnection.

- Connect the electrical conduit to the Field 

Wiring Compartment using listed  conduit 
fi ttings.

- Carry out the power supplly connection in 

accordance with the national electric code, 
ANSI/NFPA 70-1999.

4.  Insert the wires into the box, then close the 

box cover, securing it using the screws that 
were previously removed.

5. Close the fl ap until it clicks into place. 

- 19 -