Best WP29M304SB Installation Guide

- 5 -

For a ducted installation, either an interior or exterior blower or in-line blower may be used with this hood. The Best by Broan
WP29M Series must be installed with blower models P6, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only. 
Other blowers cannot be substituted. (Blowers sold separately.)
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 8, 11, 12, 14 
and up of this manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to 
seal duct joints.

For a non-ducted installation, we recommend using interior blower Best by Broan model P6 for effectiveness. (Blower sold 
separately.)
The non-duct kit ANKWP Series (sold separately) must be installed. This kit fits hood from 30-inch width up to 48-inch 
width. See installation instructions included with the non-duct kit ANKWP Series.

7" (178 mm)

ROUND DUCT

ROOF CAP

7" (178 mm)

ROUND
ELBOW

24" TO 30" (609 mm to 762 mm)

ABOVE COOKING SURFACE

WALL CAP

HOOD

DECORATIVE

FLUE

or SOFFIT

6" or 12"

(152 mm 

or 305 mm)

HH0068A

HOOD

DECORATIVE

FLUE or SOFFIT 6" or 12"

(152 mm

or 305 mm)

ROUND 
TRANSITION
4½" x 18½" to 10"
(114 mm x 470 mm 
to 254 mm)
(see page 3) 

10" (254 mm)

ROUND DUCT

ROOF

CAP

HH0069A

24" to 30" (609 mm to 762 mm)

ABOVE COOKING SURFACE

WALL
CAP

EXTERIOR BLOWER

EXTERIOR

BLOWER

DECORATIVE FLUE

or SOFFIT

HH0070A

24" to 30" (609 mm to 762 mm)

ABOVE COOKING SURFACE

10" (254 mm)

ROUND DUCT

10" (254 mm)

ROUND ELBOW

HOOD

6" or 12"

(152 mm

or 305 mm)

HH0071A