BlueStar BSMLSS58SS Installation Instruction
Trim
Screws
EZ Optional
Trim Kit
Wood
Hood
EZ
Mounting
Holes
Mounting
Screws
See
Detail B
MLSS
PMLSS
Detail A
Trim
Screw
EZ Optional
Trim Kit
1" Flange
MLSS
PMLSS
EZ Mounting
Hole
Chrome
Cap
#6 x 1/2" Screw
Detail B
See
Detail A
INSTALLING METAL LINERS
6
Figure 3.
Figure 3-A.
Figure 4.
Figure 4-A.
If the “EZ Optional Trim Kit” will be used, it
must be installed prior to mounting the metal liner
to the hood shell. Use the provided #8 Phillips
head screws. (see Figure 3.)
Lift the metal liner into the hood shell. Due to the
weight of the liner, 3 or 4 men may be required to
hold the liner in place to insure a tight installation.
1.
2.
Install #6 x 1/2” screws through the pre-drilled “EZ
Optional Trim Kit”
mount holes through to the
hood shell. Tap the chrome caps into the “EZ
Optional Trim Kit”
mount holes for a flush
appearance. (see Figure 4-A.)
Additional mounting fasteners may be used to secure
the liner to the back wall and the ceiling. Access for
drilling is through the interior of the liner.
3.
4.