Bosch B30BB830SS Installation Instruction
10
Required accessories and tools
Supplied accessories
Installation instructions
Operating instructions
Installation kit
Optional accessories
Heater Kit for Side-by-Side installation BOHEATKIT10
If the gap between the appliances is less than 6" (160 mm).
If the gap between the appliances is less than 6" (160 mm).
Other required accessories
Ice maker installation kit
1
/
4
" OD copper line
For connecting appliances which require water,
e.g. for an ice maker.
Maximum outer diameter of the water pipe
Maximum outer diameter of the water pipe
(without fittings):
3
/
8
" (9.5 mm).
Other
Stepladder
Dolly, hand truck
Hammer drill for drilling holes in wall or floor
Bits according suitable for material and in different
sizes
Wooden beam (cross section min. 3" x 4") as an
alternative tilt protection, length according to the
width of the installation cavity
Wooden screws in different sizes
Thin (max.
1
/
16
" (1.5 mm)), suitable material to
protect the floor from damage (e.g. lino)
Suitable material for covering and protecting
furniture (e.g. protective sheets)
Adhesive tape
Note:
Before using, check whether the removed adhesive
Note:
Before using, check whether the removed adhesive
tape leaves adhesive residue on the work surfaces!
Otherwise do not use on high-quality work surfaces.
Tools
Cordless screwdriver
Torx bit T20 and T30 +
magnetic holder
Torx screwdriver T20
5
/
16
" (8 mm) hex nut driver
Wood drills in different sizes
Open end wrench
1
/
2
"
(Width across flats 13 mm)
Multigrip pliers
Adjustable wrench
Cutter with adjustable blade
Metal tape measure,
folding rule
Square
Level, length 2' (60 cm) and
4' (1,2 m)