Dacor RNRP30GCLPH Installation Instruction

Installation Instructions

Assembling the Cooktop

Never attempt to operate the range’s cooktop with any of the 

burner rings, burner caps or grates removed.

Installing the Burners

There are two types of burners: the Simmer-Sear burner (left) and 

the Standard burner (right). Refer to the illustrations and STEPS 

below when intalling the burners and grates.
• 

Either type (color) of the burner caps may be used. 

• 

When installing the burner components, twist each piece 

back and forth slightly until it drops securely into place. 

• 

The burners will not operate properly unless all of the burner 

pieces are properly seated.

• 

Gently set the grates on top of the spill tray, and fit the legs of 

each grate into its corresponding notch.

STEP 1:

Install burner 

head. 

• 

Put burner 

head tab in 

keyed hole.

STEP 1:

Put burner ring on 

top of head.

STEP 2:

Install burner ring. 

• 

Line up ring 

tabs with head 

slots. 

STEP 2:

Turn burner ring until it 

drops into place.

STEP 3:

Place burner caps on top 

of rings.

• 

Flat surface is 

pointing upward.

STEP 3: 

Place burner cap on top 

of burner ring.

• 

Flat surface is 

pointing upward.

SimmerSear™ 

burner

Standard 

burner

Spill tray