Gaggenau BS485611 Owner's Manual
17
Confirm with
™
.
The appliance enters the standby mode and the
standby display appears. The appliance is now ready
for operation.
standby display appears. The appliance is now ready
for operation.
Calibrate the appliance before steaming for the first
time. The appliance sets the boiling point.
time. The appliance sets the boiling point.
Calibrating
The boiling point of water depends on barometric
pressure. As air pressure drops with increasing
elevation, the boiling point drops as well. During
calibration, the appliance sets the boiling point to the
pressure conditions at the place where it is installed.
pressure. As air pressure drops with increasing
elevation, the boiling point drops as well. During
calibration, the appliance sets the boiling point to the
pressure conditions at the place where it is installed.
It is important for the appliance to steam for
20 minutes at 212° F (100°C) without interruption. Do
not open the appliance door during this time.
20 minutes at 212° F (100°C) without interruption. Do
not open the appliance door during this time.
Notes
‒
Calibrate the appliance only when it is cold.
‒
During calibration, the appliance generates more
steam than it normally would do.
steam than it normally would do.
1
Set the function selector to
S
.
2
Select "Basic settings" using the rotary selector.
3
Touch the
™
symbol.
4
Select "Calibration" using the rotary selector.
5
Touch the
%
symbol.
6
Remove all accessories from the oven interior and
touch the
touch the
™
symbol.
7
The duration of 20:00 minutes appears. Touch
I
to start calibration.
Calibration begins. The elapsing time is shown on the
display.
display.
Note: Do not interrupt calibration. Do not turn the
function selector. Do not open the appliance door.
function selector. Do not open the appliance door.
A message appears in the display once calibration has
ended. Touch
ended. Touch
™
to confirm and turn the function
selector to
0
.
After a removal
Repeat calibration so that the appliance will
automatically adapt again to the new location.
automatically adapt again to the new location.
After resetting to factory settings
After resetting to factory settings in the basic settings
menu the appliance has to be recalibrated.
menu the appliance has to be recalibrated.
After a power failure
The appliance saves the calibration settings, even
after a power failure or a disconnection from the
mains. It need not be recalibrated.
after a power failure or a disconnection from the
mains. It need not be recalibrated.
Grease filter
Hook the enclosed grease filter onto the hot air grill in
the side wall of the cooking compartment.
the side wall of the cooking compartment.
Remove the left slide-in rail first (see section entitled
Removing slide-in rails
).
Leave the grease filter in the cooking compartment for
all applications. Clean the grease filter with hot soapy
water or in the dishwasher every time heavy dirt
deposits have been left behind after cooking.
all applications. Clean the grease filter with hot soapy
water or in the dishwasher every time heavy dirt
deposits have been left behind after cooking.
Cleaning accessories
Before using accessories for the first time, thoroughly
clean them with hot soapy water and a soft dish cloth.
clean them with hot soapy water and a soft dish cloth.
,QLWLDOVHWXSFRPSOHWH
3OHDVHFDOLEUDWHWKHDSSOLDQFH
EHIRUHILUVWFRRNLQJ
&DOLEUDWLRQ
&$/
&$/