Gaggenau BS484611 Installation Instruction

Page of 32
5
Before You Begin
Tools and Parts Needed
Philips head screwdriver
1/8" drill bit and drill
Measuring tape
Parts Included
Combi-steam oven
1 Torx screw
Power Requirements
The outlet must be properly grounded in accordance 
with all applicable codes.
Planning notes
Door hinge not interchangeable.
Distance from furniture body to door front 1.85” 
(47 mm).
Distance from furniture body to outer edge of door 
handle 3.7” (94  mm) after retrofitting the handle (special 
accessory).
Pay attention to the front protrusion, possibly including 
the door handle, for opening drawers at the sides.
When planning a corner solution, pay attention to the 
door opening angle of at least 90°.
No other electrical appliance may be integrated into the 
cupboard above this appliance.
Do not install the appliance version with the control 
panel on the bottom above a dishwasher. Ascending 
steam from the dishwasher can damage the appliance 
electronics.
You can order the following installation accessories
GZ 010 011: Extension of the supply and drain hose 
(length 6.6 ft (2 m))
GF 111 100: Descaling and taste filter
Provide the descaling system when connecting the 
appliance if the water hardness exceeds 7 dh in order to 
reduce the calcification of the appliance.
Preparing kitchen units
Units into which ovens are to be fitted must be heat-
resistant up to 195°F (90°C) and adjacent cabinets up 
to 160°F (70°C).
Connection box must be outside of the installation 
niche.
Perform cut-out work on the furniture before inserting 
the appliance. Remove any shavings or the function of 
the electrical components may be impaired.
Secure freestanding units to the wall using a standard 
bracket.
Only fit the appliance up to a height that allows 
accessories to be removed easily.