Viking VGIC53014BAR User Manual
20
Pr
oduct Car
e
Door Removal
1
2
3
4
Open door completely.
Place pin in pin hole.
Remove hinge trim screws
and hinge trim.
Close until pins stop door.
Lift door up and out.
WARNING
TO PREVENT PERSONAL
INJURY
Before removing the doors, make
sure the pins are properly
installed in the hinges. Failure to
do so can result in personal injury
to hands and/or fingers.
sure the pins are properly
installed in the hinges. Failure to
do so can result in personal injury
to hands and/or fingers.
Door Replacement and Adjustment
1
2
3
4
Reinstall door to range.
Open door completely.
Reinstall hinge trim.
Remove pins from hole in hinges.
5
If the door needs to be adjusted, loosen hinge trim
screws located in step 2. Adjust the screws located
between the door and kickplate using a 5/32” hex
head allen wrench. After adjustment, tighten hinge
trim screws.
Close door.