Bosch SPE53U5XUC Operating Guide

The amount of rinse aid dispensed can be set from “r:00” to “r:06”.
To change the setting:
1

Press the [On/Off] button.

2      Hold down the “A” button (see page 14) and press [Start] until the display indicates “H:00”.
3      Release both buttons.
4      Press the “A” button until the display shows “r:04”.
5      Press the “C” button to select the desired setting.

“r:00” = dispenser is OFF
“r:01” = lowest setting
“r:02” = low setting
“r:03” = medium setting
“r:04” = medium/high setting
“r:05” = high setting
“r:06” = highest setting

6      Press [Start] to save the setting.

You can delay the start of the cycle in one hour increments up to 24 hours.
To set delay start:
1

Press the [On/Off] button.

2      Press the [+] button until the display jumps to “h:01”.
3      Press the [+] or [-] button until the displayed time corresponds with your requirements.

h:01 = 1 hour delay 
h:24 = 24 hour delay

4      Press [Start] to activate delay start.
To cancel delay start:
1

Press the [+] or [-] button until “h:00” is indicated on the digital display.

2      Press and hold [Start] for 3 seconds to cancel the cycle. You may now start a new cycle.

To save energy, the dishwasher is turned off 1 minute after the wash cycle ends. Auto Power Off can be
adjusted from P:00 to P:02.
To change the setting:
1

Press the [On/Off] button.

2      Hold down the “A” button (see page 14) and press [Start] until the display indicates “H:0x” (x can be

any number).

3      Release both buttons.
4      Press the “A” button until the display indicates “P:0x”.
5      Press the “C” button until the display corresponds with your requirements.

P:00 = dishwasher does not turn off automatically

P:01 = dishwasher turns off automatically after 1 minute

P:02 = dishwasher turns off automatically after 120 minutes (2 hours)

6      Press [Start] to save the setting.

Our AquaStop® system contains leaks through a precisely engineered tub and sensor system that works 
with our solid molded base. If a leak has occurred, it shuts down operation and automatically pumps out 
water to avoid contact with the floor. It works 24/7 and can turn itself on.