Asko D5656XXLHSPH Installation Instruction

8

9

At this point the styrofoam, plastic wrap, and the wood 

pallet (base) should be removed from the dishwasher. 

Now is an excellent time to inspect for any shipping 

damage. Should you find any damage, you should report 

it to your dealer or builder immediately.
Be sure to remove the toe kick and toe kick insulation 

(only on certain models) from the top of the dishwasher.
Be sure to remove the transport protection for the door 

when unpacking the dishwasher.

PREPARING THE DISHWASHER FOR INSTALLATION

(Only certain models.)
This strip is an essential part of the Turbo Dry Express 

system and must be installed to ensure an optimum 

seal between the dishwasher tank and door.

(Only certain models.)
Attach the light shielding film (packed in the document 

bag) to the underside of the countertop above the touch 

buttons. 

NOTE: 

The surface on which the protective film is to be attached 

must be clean and dry.

1

1

2

2

As you do this, feed the drain line and inlet hose into the 

access hole(s) in the side of the cabinet. Use caution 

when sliding the dishwasher into place. The protective 

slides could cause damage to certain types of soft 

flooring.

WARNING!

MOVING THE MACHINE INTO PLACE

Use caution when sliding the dishwasher into place. 

The protective slides could cause damage to certain 

types of soft flooring.

2x

CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM

CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM

492169 Install DW16 USA EN Rev 01.indd   9

2015-01-13   11:12:47