Asko D5636XLHSPH Installation Instruction
8
9
WARNING!
Before working on wiring for any electrical appliance,
be sure the electrical power has been turned off at
the breaker/fuse box.
be sure the electrical power has been turned off at
the breaker/fuse box.
WARNING!
Disconnect the electrical power supply and place a
tag at the disconnect switch indicating that you are
working on the circuit.
tag at the disconnect switch indicating that you are
working on the circuit.
WARNING!
Electrical and grounding connections must comply
with the applicable portions of the national electrical
code and/or other local electrical codes.
with the applicable portions of the national electrical
code and/or other local electrical codes.
The dishwasher comes with an electrical
cord for 120 volts, 15 amp supplied. This
cord should be plugged into the 120 volt
outlet under the sink.
If the cord is not long enough, or if a hard-wire installation
If the cord is not long enough, or if a hard-wire installation
is needed, follow instructions on page 11.
This unit must be grounded to operate properly. It must
be connected to a grounded metal, permanent wiring
system, or an equipment-grounding conductor must
be run with the circuit conductors and connected to the
equipment-grounding terminal or lead of the appliance.
Damage to the dishwasher could occur if it is not properly
Damage to the dishwasher could occur if it is not properly
grounded.
WARNING!
Make sure the water supply line, drain line and branch
circuit wiring do not touch any exposed terminals of
dishwasher wiring.
circuit wiring do not touch any exposed terminals of
dishwasher wiring.
NOTE:
Access holes should be 1-1/2˝ (38 mm) in diameter
with no sharp edges.
PERMANENTLY-CONNECTED APPLIANCE
GROUNDING INSTRUCTIONS
WARNING!
Do not use an extension cord for this appliance.
185
7
CORD-CONNECTED APPLIANCE
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the risk
of electric shock by providing a path of least resistance
for electric current. This appliance is equipped with a
cord having an equipment-grouding conductor and
a grounding plug. The plug must be plugged into
an appropriate outlet that is installed and grouded in
accordance with all local codes and ordinances.
WARNING!
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock. Check
with a qualified electrican or service representative
if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the
appliance, if it will not fit the outlet, have proper outlet
installed by a qualified electrician.
conductor can result in a risk of electric shock. Check
with a qualified electrican or service representative
if you are in doubt whether the appliance is properly
grounded. Do not modify the plug provided with the
appliance, if it will not fit the outlet, have proper outlet
installed by a qualified electrician.
ELECTRICAL CONNECTIONS
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
492169 Install DW16 USA EN Rev 01.indd 8
2015-01-13 11:12:38