Fisher & Paykel DD24DAW8 Installation Instruction
3
2
PARTS SUPPLIED
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain hoses by 11’ 10” (3.6m).
The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com
The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com
Clamp (1)
(for securing
Drain hose joiner)
(for securing
Drain hose joiner)
Wire clip (2)
(for securing
Drain hose joiner)
(for securing
Drain hose joiner)
Phillips
5⁄8” (16 mm)
screws (9)
5⁄8” (16 mm)
screws (9)
Drain hose
support (1)
support (1)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
tape (1)
(to prevent moisture
damage to cabinetry)
Drain hose
joiner (1)
joiner (1)
Top
mounting
brackets (2)
OPTIONAL
mounting
brackets (2)
OPTIONAL
Prefinished
toekick (1)
toekick (1)
Edge Protector (1)
(If the services hole
is through a metal
partition, the hole must
be protected with the
Edge Protector supplied
to prevent damage to the
power cord or hoses.)
(If the services hole
is through a metal
partition, the hole must
be protected with the
Edge Protector supplied
to prevent damage to the
power cord or hoses.)
Rubber washer
for inlet hose (1)
(comes already
fitted)
for inlet hose (1)
(comes already
fitted)
Hexagonal
socket for feet
adjustment (2)
(long & short)
socket for feet
adjustment (2)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
bracket kit
(A and B) (2)
OPTIONAL