Summit WMC64P Service Manual
Service manual WM70.C
19
Components and measurement values
Item
number
number
Component
Measurement value
Comment
80 658 33
CIM motor
Resistances:
Pins 1-3 stator 3.7 Ω
Pins 1-2 stator 3.6 Ω
Pins 2-3 rotor 3.6 Ω
Pins 4-5 tacho 178 Ω
Pins 1-3 stator 3.7 Ω
Pins 1-2 stator 3.6 Ω
Pins 2-3 rotor 3.6 Ω
Pins 4-5 tacho 178 Ω
80 617 03
80 617 04
80 617 04
Heating element 2000
W
Heating element 1000
W
W
Heating element 1000
W
80 761 02
Thermistor
6.1–3.8 kΩ (at room
temperature 20–30°C)
temperature 20–30°C)
The thermistor for measuring temperature
is located between the motor cradle and the
drum. The thermistor measures and controls
the water temperature, which can vary from
0 to 92°C. The heater is disconnected if the
thermistor is short-circuited or disconnected
from the programme control card.
is located between the motor cradle and the
drum. The thermistor measures and controls
the water temperature, which can vary from
0 to 92°C. The heater is disconnected if the
thermistor is short-circuited or disconnected
from the programme control card.
88 012 63
Drainage pump 50 Hz
144 Ω
The drainage pump is combined with an
integrated fine filter trap, which can be cleaned
by the user. If the drainage pump has run for 3
minutes during draining, the programme stops,
resets and a fault code is indicated on the display.
The pump has a capacity of 20 litres/minute.
integrated fine filter trap, which can be cleaned
by the user. If the drainage pump has run for 3
minutes during draining, the programme stops,
resets and a fault code is indicated on the display.
The pump has a capacity of 20 litres/minute.
88 012 64
Drainage pump 60 Hz
76 Ω
80 782 21
Level switch
Electromechanical level switch with two levels
(see wiring diagram). Used to indicate levels for
door opening, heat and overflow.
(see wiring diagram). Used to indicate levels for
door opening, heat and overflow.
80 762 02
EMC filter 50/60 Hz
680 Ω
The filter eliminates interference to and from
the machine.
the machine.
80 793 24
Inlet valve
3.7 kΩ ± 0.5 kΩ
Two-way inlet valve, 8 litres/minute
80 798 73
Door lock
122 Ω
The door lock is electromechanical and
equipped with a magnet.
equipped with a magnet.
80 833 15
One-way inlet valve
80 818 07
Motor control
80 806 28 Control unit
80 833 43
Communication unit
80 083 65 Outlet valve