Electrolux EI36EC45KS Installation Instruction

2

Figure 2 – COUNTERTOP CUTOUT OPENING

To eliminate the risk of burns or

fire by reaching over heated surfaces, cabinet
storage space located above the cooktop should
be avoided. If cabinet storage is provided, risk
can be reduced by installing a range hood that
projects horizontally a minimum of 5” (12.7 cm)
beyond the bottom of the cabinets.

Letters on this figure refer to chart on front page except for J , K & L.

Overhead Cabinet Should Not Exceed a

Maximum Depth of 13” (33 cm)

30” (76.2 cm) Min.

Clearance Between the

Top of the Cooking

Platform and the Bottom

of an Unprotected Wood

or Metal Cabinet.

24” (61 cm) Min. when

Bottom of Wood or Metal

Cabinet is Protected by

Not Less Than 1/8” (0.3 

cm) Flame Retardant 

Millboard Covered With

Not Less Than No. 28 

MGS Sheet Steel, 0.015”

(0.4 mm) Stainless 

Steel, 0.024” (0.6 mm)

Aluminum or 0.020” (0.5

mm) Copper.

2 1/2” (6.4 cm) Min. From Edge

of Cutout to Front Edge of

Countertop

18”

(45.7 cm)

Min. From Edge of

Cooktop to Nearest 

Combustible Wall

(Either Side of Unit).

12”

(30.5 cm)

10”

( 25.4 cm)

Min. Recommended

Distance Between Rear

Edge of Cutout and

Nearest Combustible

Surface Above

Countertop

24”

(61 cm)

Install junction box at a

location which will be easy

to reach and that will not

interfere with the cooktop

installation. We suggest

12” (30.48cm) lower than

the countertop.

If a drawer is present

underneath, allow at least

10” (25.4cm) of clearance

below the countertop.

 Never store 

flammable products in the

drawer.

Min.

30’’ (76.2 cm)

2’’ (5.1 cm)

2’’ (5.1 cm)

30’’ (72.6 cm)

36’’ (91.4 cm) 

2’’ (5.1 cm)

2’’ (5.1 cm)

36’’ (91.4 cm)