BlueStar BSPC48240TS Owner's Manual

INSTALLATION OF YOUR PRO LINE SERIES HOOD BLOWER

INSTALLATION OF BS-PLIB600 INTERNAL BLOWER KIT

REFER TO WIRING DIAGRAM

1. REMOVE SHIPPING BRACKET (SEE ITEM 1)FROM HOOD. DO NOT DISCARD SCREWS!
2. INSTALL BLOWER BRACKET WITH THE SCREWS REMOVED FROM THE SHIPPING

BRACKET.

3.  LOCATE THE TERMINAL BLOCK INSIDE THE ELECTRICAL SUPPLY BOX.
4.  CONNECT FAN # 1 WIRE TO TERMINAL BLOCK #4.
5.  CONNECT FAN # 1 WIRE TO TERMINAL BLOCK #6.
6.  CONNECT THE 115 VOLT SUPPLY WIRE TO TERMINAL BLOCK #2.
7.  CONNECT THE 115 VOLT SUPPLY WIRE TO TERMINAL BLOCK #1.

INSTALLATION OF BS-PLIB1200 INTERNAL BLOWER KIT

REFER TO WIRING DIAGRAM

1. REMOVE SHIPPING BRACKET FROM HOOD. DO NOT DISCARD SCREWS!

FOR FAN #1

1. INSTALL BLOWER BRACKET WITH THE SCREWS REMOVED FROM THE SHIPPING

BRACKET.

2.  LOCATE THE TERMINAL BLOCK INSIDE THE ELECTRICAL SUPPLY BOX.
3.  CONNECT FAN # 1 WIRE TO TERMINAL BLOCK #4.
4.  CONNECT FAN # 1 WIRE TO TERMINAL BLOCK #6.
5.  CONNECT THE 115 VOLT SUPPLY WIRE TO TERMINAL BLOCK #2.
6.  CONNECT THE 115 VOLT SUPPLY WIRE TO TERMINAL BLOCK #1.

FOR FAN #2

1. CONNECT FAN #2 WIRE TO TERMINAL BLOCK #3.
2. CONNECT FAN #2 WIRE TO TERMINAL BLOCK #5.

P/N 750306 Page 15

Item 1: shipping bracket should be used with remote blower, as the attachment for the flue. Once
removed attach blower as described above.

Shipping bracket
Blower motor bracket